How to Overcome a Bad Sector Hard Drive Windows 7

Bad Sector is a condition where the operating system fails to access or read data from the hard disk because of some parts of the device that have been damaged. This condition can make the computer's performance slow, the computer turns itself off, fails to boot, etc. If the condition continues to be left it will cause more damage, the possibility that the computer cannot be turned on again. There are two types of damage that can occur, namely Hard Bad Sector (Pyhysical Bad Sector) and Soft Bad Sector (Logical Bad Sector).

Physical Bad Sector is a type of damage that is permanent or irreparable, while the Logical Bad Sector is a type of damage that can still be repaired. To deal with Bad Sector Hard disks are the types of logical bad sectors, here are ways you can do:

1. Click "Start", then click "Computer"
2. Right-click "Local Disk" to be checked, then kilk "Properties"

3. In the Local Disk dialog box, click "Tools", then click "Check now"

4. In the Check Disk Local Disk dialog box, check the Scan option, then click "Start"

5. Please wait until the process is complete. The process can take a long time and you should not use the computer.

If there is an error message that appears, the next step that must be done is as follows:

1. Click "Ok" on the message
2. Follow the previous step, click "Check now"
3. Check the Automatically fix system errors file option, then click "Start"

That's How to Overcome the Bad Sector Windows 7 Hard Drive that you can do. Perform a hard disk bad sector check regularly, so that if there are bad sectors it will not get worse and make your computer become damaged. Hopefully this article is useful.